Products
Current Location: Home>Products>
 
  • Can Liquid Nitrogen Injector

    he amount of liquid nitrogen, with the ability to have no container and no nitrogen. Siemens PLC controllable programming and touch screen control system, small size, simple and easy to understand equipment. Easy to install and can be used with any production line. All pipelines are vacuum liquid nitrogen insulated tubes, which can guarantee low liquid nitrogen consumption to a large extent. This product can precisely control the amount of liquid nitrogen, with the ability to have no container and no nitrogen. Siemens PLC controllable programming and touch screen control system, small size, simple and easy to understand equipment. Easy to install and can be used with any production line. All pipelines are vacuum liquid nitrogen insulated tubes, which can guarantee low liquid nitrogen consumption to a large extent.

    read more
  • Spray Cooler and Bottle Warmer

    ,teabeverageproductionline,makethetemperatureofhotfillingdrinkfrom85℃downto35℃-40℃orthecoldfillingdrinkupto30℃.Itsworkingprocesscanbedividedinto3stages,circulatinghotwaterspray,warmwaterpre-cooling,coldwater cooling.Itissuitableforcoolingallkindsofbottleandcannedjuiceandcarbonatedbeverage.Themainbodyismadeofexcellentstainlesssteel,runningreliableandinabeautifulappearance. Capacity:2,000bph-24,000bph

    read more
  • Ultra-clean aseptic filling equipment

    ons: (1) The material to be filled should meet the safety requirements of the shelf life; (2) The contact surface of the packaging material and the material is sterilized; (3) The filling and sealing area environment is sterilized and kept in a clean environment. The ultra-clean filling equipment adopts the ultra-clean filling process, the sterilization efficiency of the contact surface of the packaging material and the material is SE3, and the filling and sealing area should meet the requirements of the N6 clean room specified in GB 50073-2013 Design Code for Clean Plants. . Applicable products: juice, tea beverage, functional beverage, milk-containing beverage, etc. Applicable containers: PET bottles of various capacities and shapes Filling temperature: hot filling (82-92 C), medium temperature filling (68-75 C), normal temperature filling (16-35 C), low temperature cold filling (4-15 C) Filling method: mechanical, flow control, liquid level control, weighing Production capacity: 12,000 bottles / hour - 48,000 bottles / hour

    read more
  • Aseptic Cold Filling Machine

    on basis of the advantages of the similiar foreign products. Our Aseptic cold filling line adopts aseptic isolation technology to ensure the aseptic of filling material,packing environment and packaging containers.Reliable sterilizing method is used to sterilize empty bottles and caps.In addition,the utilization of COP and SOP ensures the asepsis of the equipment inside and outside surface and adoption of aseptic compressed air ensures the positive pressure of filling environment for clean room environment.Whatss more,CIP cleaning and SIP sterilizing are used to clean and sterilize the material pipeline,which prevents the material sterilized by UHT from being polluted, thus ensuring the asepsis of final products.

    read more
  • HXM-410-PET

    large torque melt motor, in order to facilitate PET raw materials plasticizing and molding; The ejector system can well meet the production of PET products; With the high-power motor - pump system, it can achieve shorter cycle time; Parameter:

    read more
  • HXM-330-PET

    arge torque melt motor, in order to facilitate PET raw materials plasticizing and molding; The ejector system can well meet the production of PET products; With the high-power motor - pump system, it can achieve shorter cycle time; Parameters:

    read more
  • HXM-298-PET

    d large torque melt motor, in order to facilitate PET raw materials plasticizing and molding; The ejector system can well meet the production of PET products; With the high-power motor - pump system, it can achieve shorter cycle time; Parameters:

    read more
  • HXM-218-PET

    melt motor, in order to facilitate PET raw materials plasticizing and molding; -The ejector system can well meet the production of PET products; -With the high-power motor - pump system, it can achieve shorter cycle time

    read more
  • Pasteurizer

    uitable for common products,but also satisfy special requirements of customers. Model Unit/ Model TG-PUT-15 TG-PUT-20 TG-PUT-25 TG-PUT-30 TG-PUT-55 TG-PUT-105 Production capacity t/h 2 3 4 5 10 20 Heat exchanging area m2 15 20 25 30 55 105 Temperature of material inlet ℃ 5 5 5 5 5 5 Temperature of material ouinlet ℃ 5 5 5 5 5 5 Sterilizing temperature ℃ 85-95 85-95 85-95 85-95 85-95 85-95 Heat preservation period S 15 15 15 15 15 15 Ice water consumption multiple 3 3 3 3 2 2 Cooling water consumption multiple 2 2 2 2 2 2 Energy consumption kw 10 10 12 14 16 20 Outiline dimensions mm 3500*1900 *1880 3500*1900 *1880 4500*1950 *1880 4500*2000 *1880 6500*2000 *1880 6500*2000 *1880

    read more
  • Stretch Bottle Blowing Machine (0.3-2L)

    I control panel. 2. Applications: all kinds of small pet bottles. 3. Modular design facilitates maintenance. 4. Crank clamping structure, close and open mold more easily. 5. Blast-air heating and cooling uniform structure type 6. Machine is very safety stabilization and no waste. 7. Application:2000ml bottle Product Parameter: Project Parameter details V02LP V04LP V06LC V08LC Specifications Of bottle type Maximum bottle volume (MM) 2.0L 2.0L 2.0L 0.75L Maximum bottle diameter (MM) 107 114 107 70 Maximum neck diameter (MM) 12-38 12-38 12-38 12-38 Maximum bottle height (MM) 350 330 320 220 Maximum pet preform height (MM) 200 130 130 110 Running distance of mould clamping 200mm 135mm 135mm 95mm Running distance of bottom mould 50mm 50mm 50mm 50mm Distance between each bottle (MM) 114.3 127 114.3 76.2 Mould standard thickness (MM) 200 200 200 200 Capacity 1800-2000 3600-4000 5600-6000 7600-8000 Cavity 2 4 6 8 Heating Part Heating Units 4 4 4 4 Layers of heating lamps 9 9 9 7 Preform seats 56 76 100 152 Electrical Parameter Voltage/Frequency 380/50Hz 380/50Hz 380/50Hz 380/50Hz Power Consumption (KW) 90.5 100 112.5 112.5 Heating power (KW/H) 28-40 60-70 60-70 60-70 Installation Heating Power (KW) 32 44 60 75 Air Resource Low Compressor Air pressure (Bar) 8-10 8-10 8-10 8-10 Low Compressor Air consumption(m/min) 1.2-1.8 1.5-2.0 1.5-2.0 1.5-2.0 High Compressor Air Pressure (Bar) 26-35 26-35 26-35 26-35 High compressor Air Consumption(m/min) 1.0-1.6 1.5-2.1 3.1-3.7 5.5-6.2 Cooling Water Pressure (Bar) 3-4 3-4 3-4 3-4 Cooling water temperature18℃ Flow (m/H) (5H) 5 5 5 5 Weight Complete Machine (KGS) 4600 5600 7000 7000 Equipment Size The Main Machine (MM) 5250*2164 *2100 4624*1992 *2100 5250*2164 *2200 5250*2164 *2100 Preform Feeder (MM) 3010*2000 *2600 3010*2000 *2600 3010*2000 *2600 3010*2000 *2600

    read more
1096 首页 1 2 3 4 5 6 7 8 9 10 下一页 末页