Products - Bottle Blow Molding Machine
 
  • Stretch Bottle Blowing Machine (0.3-2L)

    I control panel. 2. Applications: all kinds of small pet bottles. 3. Modular design facilitates maintenance. 4. Crank clamping structure, close and open mold more easily. 5. Blast-air heating and cooling uniform structure type 6. Machine is very safety stabilization and no waste. 7. Application:2000ml bottle Product Parameter: Project Parameter details V02LP V04LP V06LC V08LC Specifications Of bottle type Maximum bottle volume (MM) 2.0L 2.0L 2.0L 0.75L Maximum bottle diameter (MM) 107 114 107 70 Maximum neck diameter (MM) 12-38 12-38 12-38 12-38 Maximum bottle height (MM) 350 330 320 220 Maximum pet preform height (MM) 200 130 130 110 Running distance of mould clamping 200mm 135mm 135mm 95mm Running distance of bottom mould 50mm 50mm 50mm 50mm Distance between each bottle (MM) 114.3 127 114.3 76.2 Mould standard thickness (MM) 200 200 200 200 Capacity 1800-2000 3600-4000 5600-6000 7600-8000 Cavity 2 4 6 8 Heating Part Heating Units 4 4 4 4 Layers of heating lamps 9 9 9 7 Preform seats 56 76 100 152 Electrical Parameter Voltage/Frequency 380/50Hz 380/50Hz 380/50Hz 380/50Hz Power Consumption (KW) 90.5 100 112.5 112.5 Heating power (KW/H) 28-40 60-70 60-70 60-70 Installation Heating Power (KW) 32 44 60 75 Air Resource Low Compressor Air pressure (Bar) 8-10 8-10 8-10 8-10 Low Compressor Air consumption(m/min) 1.2-1.8 1.5-2.0 1.5-2.0 1.5-2.0 High Compressor Air Pressure (Bar) 26-35 26-35 26-35 26-35 High compressor Air Consumption(m/min) 1.0-1.6 1.5-2.1 3.1-3.7 5.5-6.2 Cooling Water Pressure (Bar) 3-4 3-4 3-4 3-4 Cooling water temperature18℃ Flow (m/H) (5H) 5 5 5 5 Weight Complete Machine (KGS) 4600 5600 7000 7000 Equipment Size The Main Machine (MM) 5250*2164 *2100 4624*1992 *2100 5250*2164 *2200 5250*2164 *2100 Preform Feeder (MM) 3010*2000 *2600 3010*2000 *2600 3010*2000 *2600 3010*2000 *2600

    read more
  • Bottle Preform & Cap mould

    hine in market . Mould Specifications:16cav,24cav,32cav,48cav Bottle neck:PCO1810,ISBT1881,3025,2925,38MM,26MM,ALCOA1716,Alaska27

    read more
  • Oil Free Air Compressor

    nk case is prevented from reaching the blow air components. * Blow the air components feature thermally stable, anti-friction parts guaranteeing long service life. * With special design air pressure will stop the lubrication oil getting into air compressing body, so the output high pressure air is clean without any oil. * An automatic unload system ensures that the system starts safety without residual pressure. * This feature protects both frame and motor and so extends the working life of all components. * Heavy-duty design for 24/7 operation. Parameters: Model Capacity m3/min /CFM Pressure Ba r/Psi Power KW/HP Dimension mm Weight Kg PETW-1.0/30 1.0/36 30/435 11 1600*830*1120 500 PETW-1.2/30 1.2/43 30/435 15 1600*830*1120 535 2-PETW-2.0/30 2.0/71 30/435 2*11 2075*1110*1570 1130 2-PETW-2.4/30 2.4/86 30/435 2*15 2075*1110*1570 1200 PETW-1.0/40 1.0/36 40/580 11 1600*830*1090 522 PETW-1.2/40 1.2/43 40/580 15 1600*830*1090 540 2-PETW-2.0/40 2.0/71 40/580 2*11 2000*1600*1270 1104 2-PETW-2.4/40 2.4/86 40/580 2*15 2000*1600*1270 1140

    read more
  • Low Pressure Screw Air Compressor

    ) span color:#e53333;= style=margin: 0px auto; color: rgb(0, 0, 0); font-family: arial; font-size: 10.5pt; Model Power KW/HP Capacity M3/min /CFM Pressure Bar /Psi Dimension Mm (L*W*H) Weight Kg Drive type KB-10A-10 7.5/10 0.9/32 10/145 890*630*920 240 Belttype KB-15A-10 11/15 1.3/46 10/145 940*705*1120 300 Belttype KB-20A-10 15/20 2.1 /75 10/145 940*705*1120 350 Belttype KB-25A-10 18.5/25 2.6/93 10/145 1055*775*1230 420 Belttype KB-30A-10 22/30 3.2 /114 10/145 1055*775*1230 450 Belttype Low pressure screw air compressor (= 8 Cavities) Model Power KW/HP Capacity M3/min /CFM Pressure Bar /Psi Dimension Mm (L*W*H) Weight Kg Drive type KB-10A-10 7.5/10 0.9/32 10/145 890*630*920 240 Belttype KB-15A-10 11/15 1.3/46 10/145 940*705*1120 300 Belttype KB-20A-10 15/20 2.1 /75 10/145 940*705*1120 350 Belttype KB-25A-10 18.5/25 2.6/93 10/145 1055*775*1230 420 Belttype KB-30A-10 22/30 3.2 /114 10/145 1055*775*1230 450 Belttype KB-40A-10 30 /40 4.5 /161 10/145 1115*800*1250 510 Belttype KB-50A-10 37 /50 5.6 /200 10/145 1170*870*1360 700 Belttype KB-60A-10 10/145 6.0 /214 10/145 1225*920*1430 800 Belttype

    read more
  • 3-stage High Pressure Air Compressor (40 Bar)

    e B.Integrated pipeline, whole machine more perfect. C.Pressure sensor makes exhaust pressure accurate, adjustment convently, fiferential pressure less than 0.5kg/cm. D.Every level equiped pressure gauge safety valve E.High pressure automatic air relsase valve, less accident than high pressure radiotude. F.Cylinder head sparate out intake cavity and air chamber, reduce suction temperature, enhance the efficiency of exhaust. Parameters: span color:#e53333;= style=margin: 0px auto; font-size: 16px; color: rgb(229, 51, 51);40bar High Pressure Air Compressor Model Capacity m 3/min /CFM Pressure Ba r/Psi Power KW/HP Dimension mm Weight Kg PET-1.0/40 1.0/36 40/580 15/20 1420*830*840 470 PET-2.0/40 2.0/71 40/580 22/30 1800*850*1110 660 PET-3.0/40 3.0/107 40/580 30/40 2020*935*1100 920

    read more
  • 2-stage High Pressure Air Compressor (30 Bar)

    B.Integrated pipeline, whole machine more perfect. C.Pressure sensor makes exhaust pressure accurate, adjustment convently, fiferential pressure less than 0.5kg/cm. D.Every level equiped pressure gauge safety valve E.High pressure automatic air relsase valve, less accident than high pressure radiotude. F.Cylinder head sparate out intake cavity and air chamber, reduce suction temperature, enhance the efficiency of exhaust . Parameters: Model Capacity m 3/min /CFM Pressure Ba r/Psi Power KW/HP Dimension mm Weight Kg PET-1.2/30 1.2/43 30/435 11/15 1570*770*1080 400 PET-1.6/30 1.6/57 30/435 18.5/25 15509850*1720 650 PET-2.0/30 2.0/71 30/435 22/30 1340*740*1490 695 PET-2.5/30 2.5/89 30/435 25/35 1790*920*1490 695

    read more
  • PP Bottle Series (0.3~1.5L)

    rotating infeed system effectively reduces the space occupied. The consistency of preform position streamlines the process. 2.48mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy saving(energy saving can be up to 30%). 3.Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance. 4.The perform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high speed and accurate perform handling between the two mechanism. 5.The Servo driven molding mechanism is synchronized by the CAM belt, triggering off the linkage to the bottom mold. The application of high speed precision blowing valve unit helps to make high capacity. 6.Operation on the touch screen is simple and easy. 7. PP bottle can withstand a temperature up to 125℃without deformation, this series is widely used for making PP bottles for soy milk beverage, liquid milk drink,pharmaceutical packaging bottle and other hot filling bottleect. Parameters: Items Unit Model VS-PP12CR1.5L VS-PP10CR1.5L VS-PP8CR1.5L Molding Spec. Cavity Pitch mm 105 96 96 Preform Heating Pitch mm 48 48 48 No.of Cav. Cav. 12 10 8 Container Spec. Max.Container Volume L 1.5 1.5 1.5 NeckDiameter Range mm 38 38 38 Max.Preform Height mm 150 150 150 Max.Preform Diameter mm 37.50 37.50 37.50 Max.Container Diameter mm 96 90 90 Max.Container Height mm 320 320 320 ※※ Theoretical Output (300~1500ml) BPH 12000~9600 10000~8000 8000~6400 Power Spec. Rated Power KW 530 460 420 Power Consumption KW 140~220 120~200 80~160 Compressor Spec. Blowing Pressure Mpa 1.6~2.5 1.6~2.5 1.6~2.5 Air Consuming m 3 /min 8~12 6~10 4~8 Main Machine Spec. Size mm 201084784 3200 170364784 3200 140504784 3200 Weight Kg 17000 15000 13000 Note: The actual output depends on the preform quality and bottle shape. Due to continuous technical development specification would be improved without prior notice. Special designs correspond to customers needs.

    read more
  • Hot Filling Bottle Series(0.3~2L)

    d to drive the molding mechanism, triggering off a bottom mold linkage as well. The whole mechanism works speedy, accurately, stably and flexibly. Meanwhile, it is energy efficient and environmental safe. 2.Oil or electricity heated, the mold can ensure bottles meet the hot filling requirement and withstand a temperature up to 90~95℃ without deformation. The capacity of each cavity can be up to 700~900bph. 3.The servo motor driven stepping unit and stretching mechanism have improved the speed, flexibility and accuracy of blowing. 4.The simple slide-in way of mold mounting makes it possible for the operators to change molds easily within 30 minutes. 5.The man-machine interface is highly automated and easy to operate. The compact machine occupies a smaller area. 6.The series is applied widely in PET hot filling bottle for juice, tea drinks, energy drinks and other hot filling drinks. Parameters ms Unit Model VS- 10CH600 VS- 8CH600 VS- 9CR1.5L VS- 6H1.5L VS- 4H1.5L VS- 6H500 VS- 4H500 Molding Spec. Cavity Pitch mm 76 76 105 114 114 76 76 Preform Heating Pitch mm 38 38 38 114 114 76 76 No.of Cav. Cav. 10 8 9 6 4 6 4 Container Spec. Max.Container Volume L 0.55 0.55 1.5 1.5 1.5 0.5 0.5 Neck Diameter Range mm 18~30 18~30 18~30 18~38 18~38 18~38 18~38 Max.Container Diameter mm 68 68 90 104 104 68 68 Max.Container Height mm 240 240 320 320 320 240 240 Note: The actual output depends on the preform quality and bottle shape. Due to continuous technical development specification would be improved without prior notice. Special designs correspond to customers needs.

    read more
  • Extra Large Volume Bottle Series(10~20L)

    rotating infeed system effectively reduces the space occupied. The consistency of preform position streamlines the process. 2. 76~96mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy saving ( energy saving can be up to 30% ) . 3. Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance. 4. The preform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high speed and accurate preform handling between the two mechanism. 5. The Servo driven molding mechanism is synchronized by the CAM belt, triggering off the linkage to the bottom mold. The application of high speed precision blowing valve unit helps to make high capacity. 6. Operation on the touch screen is simple and easy. 7.This series is applied in making PET extra large volume bottles for drinking water, edible oil, food ,daily chemicalect. Parameters: Items Unit Model VS-2C-20L VS-3C-16L VS-2C-16L VS-3C-10L Molding Spec. Cavity Pitch mm 320 280 280 245 Preform Heating Pitch mm 96 76 76 76 No.of Cav. Cav 2 3 2 3 Container Spec. Max.Container Volume L 20 16 19 12 Neck Diameter Range mm 72 63 63 63 Max.Container Diameter mm 310 260 260 220 Max.Container Height mm 520 500 505 460 ※※ Theoretical Output BPH 1200 1800 1200 3000 Power Spec. Rated Power KW 168 178 146 130 Power Consumption KW 56 ~80 55 ~78 40 ~60 45 ~60 Compressor Spec. Blowing Pressure Mpa 2.8 ~3.5 2.8 ~3.5 2.8 ~3.5 2.8 ~3.5 Air Consuming M /min 16 16 14 12 Main Machine Spec. Size mm 7500 2600 3100 7500 2600 3100 6000 2500 3100 6000 2500 3100 Weight Kg 11000 11500 9500 9600 Note: The actual output depends on the preform quality and bottle shape. Due to continuous technical development specification would be improved without prior notice. Special designs correspond to customers needs.

    read more
  • Large Volume Bottle Series(5L)

    otating infeed system effectively reduces the space occupied. The consistency of preform position streamlines the process. 2.63mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy saving(energy saving can be up to 30%). 3.Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance. 4.The preform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high speed and accurate preform handling between the two mechanism. 5.The Servo driven molding mechanism is synchronized by the CAM belt, triggering off the linkage to the bottom mold. The application of high speed precision blowing valve unit helps to make high capacity. 6.Operation on the touch screen is simple and easy. 7.The series is applied in making PET bottles for drinking water, edible oil, food, daily chemicalect. Items Unit Model VS -6C - 5L VS -5C - 5L VS -4C - 5L VS -3C - 5L VS -3E - 5L VS -2E - 5L Molding Spec. Cavity Pitch mm 190 190 190 190 228 228 Preform Heating Pitch mm 63.50 63.50 63.5 63.5 63.5 63.5 No.of Cav. Cav. 6 5 4 3 3 2 Container Spec. Max.Container Volume L 5 5 5 5 6 6 NeckDiameter Range mm 39~45 39~45 39~45 39~45 39~45 39~45 Max.Container Diameter mm 180 180 180 180 190 190 Max.Container Height mm 330 330 330 330 330 330 ※※ Theoretical Output BPH 6000 5000 4000 3000 2600 1700 Power Spec. Rated Power KW 168 148 126 96 96 66 Power Consumption KW 78 68 58 46 46 30 Compressor Spec. Blowing Pressure Mpa 2.8~3.2 2.8~3.2 2.8~3.2 2.8~3.2 2.6~3.2 2.6~3.2 Air Consuming m/min 18 16 14 12 10 6 Main Machine Spec. Size mm 75002200 2700 65002200 2700 63002200 2700 56002200 2700 48002130 2350 45002130 2350 Weight Kg 11000 9500 8600 7500 8500 7500 Note: The actual output depends on the preform quality and bottle shape. Due to continuous technical development specification would be improved without prior notice. Special designs correspond to customers needs.

    read more
212 首页 1 2 下一页 末页